Alecto DVM-150 - Page 37

37
Toswitchthetemperaturealerton/o󰀨:
1. Press the MENU button and use the or button to
scroll to the option.
2. Press the SELECT button and use the or button
to select the option.
3. Press the SELECT button and use the or button
to enable the alert (choose option ON) or to disable
it (choose option OFF). A black arrow indicates the
current setting.
4. Press the SELECT button to save your setting and
press the VIEW button to close the menu.
Operation:
The icon appears in the upper part of the display while
the temperature alert is enabled.
This icon appears each minute for 10 seconds in
the middle of the display when the baby room is
warmer than the temperature you’ve set. At the
same time you’ll hear 2 beeps.
This icon appears each minute for 10 seconds in
the middle of the display when the baby room is
colder than the temperature you’ve set. At the
same time you’ll hear 2 beeps.
These warnings stop when the temperature rises or drops
within the limits you’ve set or after you disable the alert.
Temperature notation in °C or °F:
You may choose to have the temperature displayed in
degrees Celsius (°C) or in degrees Fahrenheit (°F).
1. Press the MENU button and use the or button to
scroll to the option.
2. Press the SELECT button and use the or button
to select the
FC
option.
3. Press the SELECT button and use the or button
to select the desired display (a black arrow indicates
the current setting)
4. Press the SELECT button to save your setting and
press the VIEW button to close the menu.