32
4 USE
4.1 BABY UNIT (CAMERA):
To switch on/o:
• At the right side of the unit, slide the switch up-
wards to turn on the baby unit.
• Slidethisswitchdownwardstoturnothebabyunit.
Thegreenindicatoronthebabyunitasheswhilethebaby
unit is searching for the parent unit and remains lit when
the connection is made.
Volume:
Use the VOLUME+ and VOLUME- buttons to set the
volume for the talk-back function and for the lullabies and
natural sounds.
Automatic night vision:
The baby unit is provided with built-in infra-red LEDs; these
LEDs will switch on automatically when the baby room
turns dark and will switch of again when it becomes light.
The LEDs can illuminate objects up to a distance of
approximately 2 meters.
When it’s dark, that is when the night vision LEDs
are switched on, the images on the parent unit will
be displayed in black and white.
Attention: infra-red light cannot be perceived by the
human eye; that means you cannot tell whether the
infra-red LEDs are switched on with the naked eye.
To Next Page
Loading...
Need help?
General
