Alecto DVM-150 User Manual

39
1. Press the MENU button and use the or button to
scroll to the option.
2. Press the SELECT button and use the or button
to select the option.
3. Press the SELECT button to save your setting and
press the VIEW button to close the menu.
Playback volume:
Use the VOLUME+ / VOLUME- buttons on the baby unit to
adjust the playback volume.
To register and de-register additional cameras:
You may connect up to 4 cameras to the parent unit.
Separate cameras are available via the supplier of
the DVM-150 or via internet www.alectobaby.nl
To register a new camera:
1. Remove the new camera from its packaging, connect
the supplied power adaptor and insert it into a 230V
wall socket. Slide the switch upwards to switch on
the camera.
2. Take a paper clip and bend it partially open.
3. Press the MENU button on the parent unit and use the
or button to select the option.
4. Press the SELECT button and use the or button
to select the option.
5. Press the SELECT button and use the or button
to select a free camera number displayed in black.
Camera numbers shown in the background are cur-
rently being used already.
6. Press the SELECTbuttonandconrmyourchoiceby
selecting the “ ” icon with the or button.
7. Press the SELECT button and an hourglass icon
appears in the display.
8. Now use the bent paper clip to press
the little hole in the bottom of the cam-
era (next to the word PAIR). There’s
a small push-button inside this hole.
Keep this button depressed with the
paper clip until the power indicator on
theadditionalcamerastartsashing
rapidly after approximately 5 seconds.
9. After several seconds the image of the new camera
appears in the display of the parent unit.

Alecto DVM-150 Specifications

General

Brand	Alecto
Model	DVM-150
Category	Baby Monitor
Language	English