- Page 13 -
Pitch bend amounts can be entered with the keypad, but the only way to achieve negative numbers is to
use the `-' button until negative numbers are reached, after which any keypad entry will be negative.
For after touch, the display includes the beat, sub-beat, MIDI channel, and after touch amount. The after
touch range is from 0 to 127. The page up and page down displays scroll as follows:
For controllers, the display shows the beat, sub-beat, controller number, controller amount, and MIDI
channel. The controller range is from 0 to 121. The controller amount range is from 0 to 127. The page
up and page down displays scroll as follows:
For program changes, the display includes the beat, sub-beat, program change number, and MIDI
channel. The program range is from 0 to 127. The page up and page down displays scroll as follows:
For system exclusive information, the number of parameters could be any value. Since this could contain
a large amount of information, the page up and page down buttons continue to scroll the data through
the display until the end is reached. The display includes the beat, sub-beat, and any system exclusive
data, as follows:
To Next Page
Loading...
Need help?
General
