Alesis MMT-8 - To Clock the MMT-8 from Tape Sync

- Page 35 -
23.2 To clock the MMT-8 from tape sync
1. Connect the output of the track of the tape machine that has the sync tone to the
TAPE IN jack of the MMT-8.
2. Press and hold the CLOCK button. The display will read:
3. Use the keypad or +/- buttons to select TAPE SYNC IN. The display should read:
4. Put the tape machine into PLAY. The MMT-8 will automatically start as soon as it
receives the sync tone, causing any other sequencers connected to it to play. Be
careful to return to the beginning of the sync tone since the MMT-8 will automatically
begin playing any time that it recieves the sync tone.