Need help?Do you have a question about the Alesis Strike Multipad and is the answer not in the manual?
General| Power source type | DC |
|---|---|
| Display type | LED |
| Built-in display | Yes |
| USB connector type | USB Type-A, USB Type-B |
| USB ports quantity | 2 |
| Card reader integrated | No |
| Bit rate | 16 bit |
| Sample rate | 48 kHz |
| Housing color | Black |
| Sound effects | Chorus, Compression, Delay, Echo, Equalization, Filtering, Flanger/Digital Signal Processing (DSP), Modulation, Overdrive, Phaser, Pitch shift, Reverberation |
| Number of pads | 9 |
| Number of knobs | 6 |
| Number of samples | 8000 |
| Internal storage capacity | 36 GB |
Weight and Dimensions| Depth | 355.6 mm |
|---|---|
| Width | 349.25 mm |
| Height | 76.2 mm |
| Weight | 3850 g |
Details the function of each control on the top panel, including knobs, display, and buttons.
Explains how to navigate and use the Perform Mode for kit selection and effect management.
Guides users on accessing the Looper, setting parameters, recording, and managing loops.
Details the Kit Menu for managing kits and adjusting parameters like tempo, time signature, and LED lighting.
Details how to adjust pad sensitivity, response curve, threshold, and fixed velocity for playing dynamics.
Explains pad control modes and audio output routing options for pads, triggers, and footswitches.
Guides users on browsing factory sounds and importing WAV files from USB drives into the sound library.
Details playback modes (OneShot, Loop, etc.) and mixing parameters like volume, pan, and fade for individual sounds.
To Next Page
