Alesis Strike Multipad - Light

15
Light
Press the F4–Light button to edit the settings for the pad LEDs.
Parameter Description
V
alues/Settings
Play Colo
r
This setting determines the color of the pad and trigger
LEDs when active.
Red, Coral, Deep Pin
k
, Light Pin
k
, Magenta,
Purple, Plum, Blue, Sky Blue, Cyan,
A
quamarine, Lime, Green, Yellow, Orange,
Orange Red, White
Play Mode
This setting determines the behavior of the pad and
trigger LEDs when activated.
Off: Lights remain at the Stop Mode setting
when triggered.
Trigger: Lights go from dim to bright when a
sound is triggered.
A
udio Meter: Lights represent a signal meter
(left to right) for the pad volume level.
A
udio Breath: Lights flash from dim to bright
based on the sound volume level.
Fill: Lights move from left to right and back
based on the length of the sound.
BPM Pulse: Lights flash from dim to bright in
time with the Kit Tempo.
BPM Pong: A "dot" of bright color moves from
left to right and back in time with the kit time
signature and tempo.
Play Beat For Play Mode settings that are BPM-dependent, this
setting determines the beat division
1/2, 1/4, 1/8, 1/16
Stop Colo
r
This setting determines the color of the pad and trigger
LEDs when no sound is being played.
Red, Coral, Deep Pin
k
, Light Pin
k
, Magenta,
Purple, Plum, Blue, Sky Blue, Cyan,
A
quamarine, Lime, Green, Yellow, Orange,
Orange Red, White
Stop Mode
This setting determines the color of the pad and trigger
LEDs when inactive.
Off: Lights are off.
Solid Dim: Solid dim color.
Solid Medium: Solid medium color
Solid Bright: Solid bright color.
BPM Pulse: Lights flash from dim to bright in
time with the Kit Tempo.
BPM Pong: A "dot" of bright color moves from
left to right and back in time with the kit time
signature and tempo.
Stop Beat For Stop Mode settings that are BPM-dependent, this
determines the beat division
1/2, 1/4, 1/8, 1/16