22
Pedals
Press the F4–Pedals button to open the Pedals menu, where you can adjust the settings for the three Foot Control
connections on the rear panel (HH, 1/2, 3/4).
Parameter Description
alues/Settings
Pedal
This setting determines the pedal to be edited. The
additional options available on this page will change
depending on which pedal is selected.
HH, FC1, FC2, FC3, FC4
Type
This setting determines the type of hi-hat or footswitch
control.
ariable: The hi-hat pedal or footswitch
will send a variable range of velocity
values.
Switch: The hi-hat pedal or footswitch
only sends fixed on/off velocity values.
HH
Fix Level When Type is set to Switch, this setting determines the
fixed velocity level that is sent.
0–127
Op Pos / Cl Pos When Type is set to
ariable, these settings determine the
velocity of the Open Position and Close Position for the hi-
hat.
0–127
FC
Pola
This setting determines the polarity of the footswitch.
Normal, Inverse
To Next Page
Loading...
