19
Edit
Press the F6–Edit button to open the Sound Edit menu, where you can perform various non-destructive and destructive
edits to your WAV files.
Factory Samples cannot be destructively edit. If you would like to edit a Factory Sample, you must first copy the sample
to the Edit menu will at first show only one option, Copy to User.
Once the sample has been copied to the User Library, the following options will be available:
• Rename: Select this option to rename the selected Wave.
• Edit Start/End: Select this option to edit the start and end points of the sample. While viewing this page, you can
perform the following functions:
Use the Main Encoder to move both the start and end points at the same time.
Use the A-Link 1 and 2 encoders to adjust the start and end points individually. You can set the level of adjustment
using the A-Link Bank Buttons—press A for coarse adjustment, B for medium and C for fine.
Additionally, use the function buttons to perform the following additional functions:
o F1–Play/Stop: Press this button to play or stop the sample.
o F3–Grid: Press the button to adjust a preset grid of points. Select Free to freely move the start and end points
throughout the sample, or select Grid 4, Grid 8 or Grid 16 to set evenly spaced markers along the waveform
based on the Global BPM value. Moving the A-Link encoders will now snap the start and end markers to these
points.
This is particularly useful when editing loops or selecting a smaller "slice" from a larger sample. Adjust the Global
Tempo using the BPM button to move the grid points in the waveform until they are correctly aligned with the
sample tempo.
o F4–Zoom: Press this button to toggle between zoomed-in and zoomed-out views. Press and hold this button
and turn the Main Encoder to change the zoom level.
o F5–Save: Press this button to save the edited sample.
o F6–Exit: Press this button to exit the trim function without saving.
• Normalize: Select this option to normalize the sample audio. Press F1/F2 to Ov
erwrite the sound file, F3/F4 to Save
As New sound file, or F5/F6 to Cancel. New files will be placed in the same User Category as the sample being
edited.
• Pitch: Select this option to adjust the pitch of the sample up to 1200 cents in either direction. Use the Main Encoder
to select the amount of pitch change, and then press F1/F2 to Overwrite the sound file, F3/F4 to Save As New sound
file, or F5/F6 to Cancel. New files will be placed in the same User Category as the sample being edited.
• Reverse: Select this option to reverse the sample audio. Press F1/F2 to Overwrite the sound file, F3/F4 to Save As
New sound file, or F5/F6 to Cancel. New files will be placed in the same User Category as the sample being edited.
• Copy: Select this option to copy the sample to a new file.
• Delete: Select this option to delete the sample file.
Important: This action does not require confirmation and cannot be undone.
To Next Page
Loading...
