72
Eyelet
Machine setting
q Stitch pattern: #21
w Presser foot: Satin stitch foot F
e Thread tension: 1 – 4
The eyelet is used for belt holes etc.
The machine will sew an eyelet and will stop
automatically when completed.
Open the eyelet with an awl, puncher or pointed
scissors.
Correcting the shape of an eyelet
The eyelet can be distorted depending on the sewing
conditions. Press the stitch length button to correct
the shape of the eyelet (the indicator shows the
preset value "L2").
(A) If the eyelet opens, press the "–" sign ("L1"
will be indicated) to correct it.
(B) If the eyelet overlaps, press the "+" sign ("L3"
will be indicated) to correct it.
(A)
(B)
q
w
e
To Next Page
Loading...
