3 Installation
The instruction manual is part of the delivery.
Study the instructions carefully.
Fit the warning label supplied on the valve after installation so that it is normally visible.
3.1 Unpacking/intermediate storage
Step 1
CAUTION
Alfa Laval cannot
be held responsible for incorrect unpacking.
Check the delivery for:
1. Complete valve.
2. Delivery note.
3. Warning label.
Step 2
Remove upper support.
Step 3
Lift out the valve.
NOTE!
Please note weight of valve as printed on box.
Step 4
Remove possible packing materials from the valve ports.
TD 449-043_1
8
To Next Page
Loading...