alfaplam TERM -20 - Table of Contents

The contents:
1. PURPOSE ....................................................................................................................................................... 1
2. THE RESPONSIBILITY OF THE MANUFACTURER ............................................................................................ 1
2.1. THE BASIC CHARACTERISTICS OF THE USER ......................................................................................... 1
2.2. THE TRANSPORTATION AND USE OF THE SOLID FUEL – HANDLING ..................................................... 1
2.3. THE RESPONSIBILITY OF THE INSTALLER ............................................................................................. 1
3. APPEARANCE AND STRUCTURE OF A SOLID FUEL WITH A FLOOR HEATING BOILER (fig.1) .......................... 2
4. SAFETY AND RELIABILITY IN SOLID FUEL OPERATION .................................................................................. 2
5. SOLID FUEL PLACEMENT (INSTALLING) ........................................................................................................ 2
5.1. INSTRUCTIONS FOR COMBUSTION AND VENTILATION .......................................................................... 2
6. FLUE INSTALLING .......................................................................................................................................... 3
7. INSTALLING SOLID FUEL IN WATER HEATING SYSTEM ................................................................................. 5
7.1. DISCHARGE AND RETURN LINE (fig.4 pos.1 and 2 and fig.7 and fig.8 pos.3 and 10) .............................. 5
7.2. THERMAL VALVE WITH BUILT-IN THERMAL PROTECTION AND ADDITIONAL ELEMENTS FOR
CONNECTION..................................................................................................................................................... 5
7.2.1. THERMAL VALVE WITH BUILT-IN THERMAL PROTECTION (Fig. 7, Item 13 and Fig. 7a) ................. 6
7.2.2. SLOPE PRESSURE REGULATOR 1/2" WITH MANOMETER (Fig. 7, Item 19 and Fig. 7b) ................... 6
7.2.3. WATER FILTER OF THE BOILER INTAKE (Fig. 7, Item 20)................................................................. 6
7.2.4. WATER FILTER OF THE BOILER OUTLET (Fig. 7, Item 21) ................................................................ 6
7.3. SAFETY VALVE (fig. 7 and 8 pos. 5 and fig. 4 pos. 6 ) ........................................................................... 6
7.4. THERMOMETER AND MANOMETER (fig. 1 pos. 16 and 17 and fig. 5) ..................................................... 6
8. PRACTICAL INSTRUCTIONS AND ADVICE FOR HEATING SYSTEM USE .......................................................... 7
9. COMMISSIONING AND STOKING .................................................................................................................... 8
10. GRATE USE IN UPPER AND LOWER POSITION ............................................................................................ 9
11. AUTOMATIC REGULATION ....................................................................................................................... 10
12. SECUNDARY AIR REGULATOR .................................................................................................................. 10
13. COOKING, BAKING AND FRYING............................................................................................................... 10
14. HEATING MATERIAL ................................................................................................................................. 10
15. CLEANING AND MAINTENACE .................................................................................................................. 11
16. SOLID FUEL STORAGE .............................................................................................................................. 11
17. FAULTS .................................................................................................................................................... 11
18. Overall dimensions of solid fuel ALFA TERM 20 ....................................................................................... 14
19. DETERMINING THE REQUIRED HEAT OUTPUT .......................................................................................... 14
20. TURNING THE APPLIANCE OFF ................................................................................................................ 14