24 | Setting up the monitor
Setting up the monitor
Attaching the stand
NOTE: The stand is not installed at the factory when shipped.
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the set up instructions
that were included with the stand.
CAUTION: The steps are important to
protect your curved screen. Do
follow the instructions below to finish up the installation.
To attach the monitor stand:
1. After opening the
box, remove the foam cushion from the top of the
package.
2. Invert the foam cushion and place it on a flat surface.
To Next Page
Loading...
