Setting up the monitor | 31
VESA wall mounting (optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come wit
h the VESA-compatible wall mounting kit.
1. P
lace the monitor panel on a soft cloth or cushion on a stable flat surface.
2. Re
move the monitor stand. (See Removing the monitor stand.)
3. U
se a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4. A
ttach the mounting bracket from the wall mounting kit to the monitor.
5. M
ount the monitor on the wall. For more information, see the
documentation that shipped with the wall mounting kit.
NOTE: For use only with UL-listed wall mount bracket with minimum
weight or load bearing capacity of 29.1 kg (AW3418DW)/27.6 kg
(AW3418HW).
To Next Page
Loading...
