14
Connecting the headset to your device
Connecting the headset to your device using the inline audio cable
1. Connect the microphone end of the 3.5 mm inline audio cable to the port on your headset. Connect the other end of the audio
cable to the headphone/headset port on your computer or mobile device.
2. Both audio and microphone functions will now be available through the 3.5 mm inline audio cable. The buttons and LEDs are
disabled if the headset is turned off.
3. The audio and mic functions will automatically be routed to the 3.5 mm cable regardless if the headset is powered on or off.
2.4G mode is restored once audio cable is removed.
4. When using the 3.5 mm inline audio cable, the headset is compatible with audio ports like PlayStation, Xbox and mobile phones.
Figure 11. Inserting the inline audio cable
NOTE: The audio from the 3.5 mm inline audio cable is muted when the headset is charging.
NOTE: Ensure that the audio plug closer to the inline microphone is inserted to the headset port.
To Next Page
Loading...
