Setting up lighting and animation
│
19
1. Select Effect from the drop-down list for STATIC (ALWAYS ON) or ON KEY
PRESS modes.
2. For STATIC (ALWAYS ON), select the section of the keys or all sections that
you want to apply the animation above the keyboard image.
3. From the menu of supported animations, select one of the following: Off,
Color, Pulse, Morph, Breathing, Spectrum, Single Color Wave, Rainbow
Wave, Scanner, and Static Default Blue.
4. For Color animation, define the color of the keyboard animation effect by:
- Choose color using the color wheel bubble or enter the RGB value of the
desired color or select from the PRESET COLORS.
- Adjust the brightness.
- Adjust the tempo of the animation effect.
Additional settings for some lighting effect in AWCC 5.5:
Setting up lighting and animation
To Next Page
Loading...
