Alienware m17 P37E - Replacing the Display Bezel; Procedure; Post-Requisites

Replacing the display bezel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Align and place the display bezel onto the display assembly and snap it into place in the following order: Bottom
(Alienware logo)->Right->Left->Top (camera).
Post-requisites
1 Replace the display assembly.
2 Replace the wireless card.
3 Replace the base cover.
70