Alinco DR-435T - Theft Alarm System Operations; Theft Alarm: Operation 1 Setup

7. Advanced Operations
AUTO-DIALER
This will automatically transmit pre-programmed DTMF tones. DTMF (Dual-Tone-Multi-Fre-
quency) are the same tones used in the telephone system, and they are often used to remote control
electronic devices or AUTOPATCH phone systems available on some repeaters.
To program tones in the Auto-dialer memory:
30
1.
Press FUNC key and TS/DCS key at the same
time to enter the setting mode. Default display
is 0 on the right end of the display. Memory
channel icon displays which of the ten auto-
dial memories (0~9) is in use.
Use UP/DOWN keys to select the desired chan-
nel.
Rotate the main dial to select the first digit, then
press TSQ key to enter. The Cursor moves to-
ward right. Repeat sequence to complete.
Use [-] for pause. The display scrolls when the
7th digit is entered. The numbers 0 to 9, pause,
* and # can be stored up to a total of 16 digits.
To check the entered digits, press FUNC then
rotate the main dial while F icon is on.
To delete, press CALL key. Press PTT, V/M,
MHz or SQL keys to exit and return to original
status.
1é 12356
(Ex. Dialer set mode)