PB13
TROUBLE SHOOTING
Problem Possible Causes and Potential Solutions
(a) Power is on, nothing appears on
Display.
Polarities of power connection are reversed. Connect red lead to positive terminal and black lead to
negative terminal of DC power supply.
(b) Fuse is blown. Check and solve problem resulting in blown fuse and replace fuse with new fuse.
(c) No sound comes from speaker.
Squelch is muted. Decrease squelch level.
(d)
Key and Dial do not function. Key-lock function is activated. Cancel Key-lock function.
(e) PTT key is pressed but
transmission does not occur.
• Microphone connection is poor. Connect microphone properly.
• Antenna connection is poor. Connect antenna properly.
If a problem should occur, first try the troubleshooting procedure given above. If the problem persists, contact your nearest ALINCO
dealer for technical assistances.
To Previous Page
Loading...
