6
1. Pressure Dial Gauge: Easy to read pressure gauge lets you
know when the internal pressure is down to zero and the
cooker/canner is safe to open.
2. Side Handles: Use the side handles when lifting the pressure
cooker. Models 930 & 941 have larger handles attached to
body.
3. Top Handle: The top handle is used to place or remove the
cover on to, or off of the bottom only. Never lift the entire
cooker by using the top handle.
4. Wing Nuts: The cover is secured with large, stay-cool phenolic
wing nuts. These will require lubrication from time to time.
(Please see page 8)
5. Clamp Bolts: Threaded aluminum bolts that attach to the wing
nuts, and help to hold the cover down tight.
6. Automatic Pressure Control: This is made up of the round
selective pressure regulator weight and the vent pipe. The
vent pipe is attached to the cover and the pressure regulator
weight sits on top of the vent pipe.
GETTING ACQUAINTED
Part #64
Part #54
Part #72
Part #405
(Model 930& 941)
Part #76-09 w/screws
Part #68
To Next Page
Loading...
