Page 13 of 20 December 2014 Ver 4
9 RELEASE FOR SERVICE
9.1 Remove all tools, installation equipment, and debris from the vicinity of the door.
9.2 Install all safety, traffic control, and instruction labels on the door as required by the latest
AS_5007 Standard. Failure to do this leaves the installer LIABLE for any accident that
might occur. This must be done.
9.3 Verbally instruct the owner or person in charge of the proper operation of the door.
9.4 Instruct the owner or person in charge to routinely inspect the door for the following
• Occasional damage
• Developing problems
• Minor preventative maintenance
9.5 Instruct the owner or people in charge who and where to call for service and maintenance
when required.
IMPORT
Make sure to install all safety, traffic control and
instruction decals on the door as required
ANT
To Next Page
Loading...
Need help?
General
