Need help?Do you have a question about the ALLEN & HEATH Avantis and is the answer not in the manual?
General| Type | Digital Mixer |
|---|---|
| Sampling Rate | 96kHz |
| MADI | Optional via expansion card |
| Channels | 64 |
| Touchscreens | 2 x 15.6" |
| Local I/O | 12 XLR inputs, 12 XLR outputs |
| Networking | Dante, Waves SoundGrid, AES50 |
| EQ Bands | 4-band parametric EQ |
| Effects | 12x RackFX slots with dedicated stereo returns |
| Data I/O | Ethernet |
| USB | Stereo recording/playback |
| Dynamic Processing | Gate, compressor |
| AES50 | Yes |
| Faders | 24 + 1 motorized faders |
Emphasizes reading safety instructions for operator and equipment safety.
Precautions for handling, environment, and cleaning to prevent equipment damage.
Procedure for correctly powering up the Avantis mixer and connected expanders.
Steps to calibrate the touch sensitivity of the faders for optimal performance.
Guide to connecting remote I/O expanders using CAT5e cables and SLink port.
Correct procedure for powering down the system to prevent data loss.
Details of the 12 recallable preamps for microphone and line level signals.
Port for connecting remote I/O expanders and personal monitoring systems.
Details on the 15.6" capacitive touchscreens for interaction and control.
Controls for user-assignable parameters, typically associated with screen interaction.
Detailed description of fader strips including rotaries, mute, mix, and PAFL functions.
Details on the two touchscreens, their modes, menu tabs, status bar, and controls.
How to set up and control the main stereo mix using input and master strips.
Using mix master strips to control send levels to Aux and FX mixes.
Using input channel strips to control send levels to Aux and FX mixes.
To Next Page