CTi-1500 Surface Getting Started Guide
Balanced XLR, +48V phantom power
Measured balanced XLR in to XLR out, 20-20kHz, minimum Gain,
Pad out
THD+N (analogue in to
out)
0.0015% @ +16dBu output, 1kHz
0dB gain
>4kΩ (Pad out), >10kΩ (Pad in)
+18dBu = 0dBFS (+22dBu at XLR
output)
Per socket, internal or external
phantom power sensing, triggered at
24V
0dB meter = -18dBFS (+4dBu at
XLR out)
AES3 2 Ch XLR, 2.5Vpp balanced
terminated 110 Ω
-3dBFS (+19dBu at XLR out)
SRC range 32k - 192kHz, with bypass
option
0.7 ms (MixRack XLR in to XLR out,
Input to Mix)
+ 5 samples, Surface to Mixrack
(GigaACE hop)
+4dBu = 0dB meter reading
+ 8 samples, DX32 to Mixrack (DX
hop)
Operating Temperature
Range
0 deg C to 35 deg C (32 deg F to 95
deg F)
100-240V AC, 50-60Hz, 110W max
AES3 2 Ch XLR, 2.5Vpp balanced
terminated 110 Ω
96kHz sampling rate, switchable to
48kHz, 44.1kHz
Mono/stereo .WAV files, 16/24bit,
44.1/48/96kHz
Stereo .WAV files, 24bit 96kHz
Width x Depth x Height x Weight
Width x Depth x Height x Weight
440 x 644 x 337 mm x 11.5kg
(17.4"x 25.4"x 13.27") (25.4lbs)
655 x 820 x 470 mm x 20kg
(25.8"x 32.3"x 18.5") (44lbs)