ALLEN & HEATH GL4000 Service Manual

ALLEN & HEATH
GL4000 SYS-LINK OPTION
2
FITTING THE GL4000 SYS-LINK EXPANDER OPTION
nn
nn
n
CHECK THE CONTENTS :
LONG NOSE
GL4000-SL1
oo
oo
o
TOOLS REQUIRED :
1pt & 2pt CROSS POINT
Rear panel D type
chassis connector
fixings already fitted.
8 x AB2189
fig. 1
Ribbon harness assembly supplied
pre-formed and connected to circuit
board assembly.
rear extrusion earth wire
Contents:
1x SYS-LINK circuit board assembly with interconnecting harness and mountings already fitted.
1x SYS-LINK ribbon harness assembly with D type chassis connector fixings already fitted.
1x SYS-LINK Fitting Instructions (AP2786)
1x SYS-LINK Application notes (AP2787)
4x self adhesive foam pads (AK0332)
4 x foam strips

ALLEN & HEATH GL4000 Specifications

General

Type	Analog Mixing Console
Groups	8
Faders	100mm
Frequency Response	20Hz - 20kHz
Channels	40
Mic/Line Inputs	40
EQ	4-band with 2 sweepable mids
Direct Outputs	Yes
Phantom Power	Yes
Metering	LED
Total Harmonic Distortion	< 0.005% at 1kHz
Noise (EIN)	-128dB
Dimensions	Varies depending on frame size. e.g., 40 channel: 1367mm (W) x 724mm (D) x 223mm (H)