ALLEN & HEATH ME-1 User Manual

User Guide – AP8997 iss.3 4 ALLEN&HEATH
Operating firmware
The function of the ME-1 mixer is determined by the operating firmware that runs
within it. Firmware is updated when new features are added or improvements
made. Check the Allen & Heath web site for the latest version available. This can
be downloaded, transferred to USB key and then loaded into the ME-1 mixer using
the Firmware Setup menu.
www.allen-heath.com/me-1
Software licence agreement
By using this Allen & Heath product and the software within it (the firmware) you
agree to be bound by the terms of the relevant End User Licence Agreement
(EULA), a copy of which can be found on the Allen & Heath web site. You agree to
be bound by the terms of the EULA by installing, copying, or using the software.
www.allen-heath.com/legal
Further information
Please refer to the Allen & Heath website for further information, knowledgebase
and technical support. You can join our Allen & Heath Digital Community to share
knowledge and information with other ME-1 users.
Register Your Product
Register your ME-1 with Allen & Heath online at:
http://www.allen-heath.com/register
USO RESTRITO

ALLEN & HEATH ME-1 Specifications

Audio Output

stereo out power	300+300mW into 100 Ω
mono out max level	+18dBu
aux input max level	+10dBu

Power

mains power unit	100-240V AC 50/60Hz
power over ethernet requirement	10W

Weight and Dimensions

dimensions	225 x 150 x 55mm
weight	900g