Need help?Do you have a question about the ALLEN & HEATH XONE:3D and is the answer not in the manual?
General| Brand | ALLEN & HEATH |
|---|---|
| Model | XONE:3D |
| Category | Music Mixer |
| Language | English |
Guide to installing drivers and utilities for Windows 2000 and XP.
Steps for setting up the Xone:3D on macOS.
Explanation of the BPM counter and its MIDI clock output functionality.
Details on the Xone:3D's extensive MIDI control capabilities.
Information on the 8-channel soundcard, ASIO drivers, and modes.
Configuration details for the default soundcard operating mode.
Configuration details for the alternative soundcard operating mode.
Instructions for changing the soundcard's operating mode via the utility.
How to configure audio input and output routing using the utility.
Guide to configuring MIDI channel and mapping within the utility.
How to adjust signal levels sent to the FX mix busses from each channel.
How to select audio sources (Line A, Line B, Soundcard) for each channel.
Adjusting channel signal levels and monitoring with meters.
Details on the 3-band EQ stage for dramatic tonal shaping.
Routing channel signals through filters or the crossfader.
Fading between signals routed to either side of the crossfader.
Connecting the power cable to the mixer.
The main balanced XLR output for PA systems.
Connecting digital audio sources and destinations via SPDIF.
Connecting MIDI devices using 5-pin DIN connectors.
Connecting the Xone:3D to a computer via USB for audio and MIDI.
Selecting between two available MIDI control mappings.
Setting the MIDI channel for transmitting mixer messages.
To Next Page
