Allen & Heath 6 XONE:43C User Guide
MIC / AUX INPUT CHANNEL
3
Mic Input
Standard 3-Pin XLR socket wired as Pin 1 = Ground, Pin
2 = hot (+), Pin 3 = cold (-).
2
Mic / Aux Select Switch
Selects either the XLR microphone input or the alterna-
tive Aux input.
4
Channel Gain Control
Adjusts the input sensitivity of the Mic / Aux channel to
compensate for different source signal levels.
5
Channel Equaliser
The Mic / Aux input channel is equipped with a 2 band
EQ stage providing +15dB of boost when fully clockwise
and –15dB attenuation when fully anti-clockwise.
1
Aux Input
Dual RCA sockets for connecting an external line level
source.
7
Channel On Switch
Press the Channel On switch to send the channel audio
to the main mix.
6
Cue Switch
Press the Cue switch to listen to the pre-channel on sig-
nal in the headphones and view its level on the main me-
ters. Press the switch again to deselect cue.
1
2
3
4
5
7
6
To Next Page
Loading...
