Allen & Heath 8 XONE:43C User Guide
PHONO / USB / LINE INPUT CHANNELS 1 - 4
9
Channel Fader
A high quality, smooth travel fader adjusts the channel
signal level from fully off to fully on.
8
Channel Meter
Displays the channel signal level. It is pre-EQ and pre-
fader, allowing the input level to be displayed even if the
EQ is set to off on all bands.
The channel level control should be set so that the me-
ter averages around ‘0’ with loudest peaks no higher
than ‘+6’. Turn down the level control if the +10 indica-
tor lights.
7
Cue Switch
Press the Cue switch to listen to the channel pre-fade
signal in the headphones and see its level on the main
meters. Press the switch to deselect cue.
9
8
7
To Next Page
Loading...
