Allen & Heath User Guide for XONE:DX with Serato ITCH 1.6 18
MASTER SECTION
CHANNEL METERS
The Channel Meters display the level of the Main Mix Bus. The meter display is
sourced pre Master level and so does not represent the signal level on the outputs.
During normal operation the meters display the level of the left and right channel of
the program material.
In SPLIT CUE mode, the left meter displays the level of the CUE signal and the right
meter displays the level of the program signal.
MASTER / BOOTH LEVEL CONTROLS
MASTER - the Master control adjusts the Master output level of the Xone:DX. The
Master output is provided by balanced XLR connectors and unbalanced Phono/RCA
connectors.
BOOTH - the Booth control adjusts the Booth output level of the Xone:DX. This
allows for adjustment of the DJ booth monitor speaker without altering the Master
output level.
LIBRARY NAVIGATION
See Page 19.
HEADPHONE MONITORING
PHONES LEVEL CONTROL - adjusts the level of the signal sent to the head
phones. The headphones can be connected to the Xone:DX via 1/4 inch and 3.5mm
Jack sockets.
SPLIT CUE - The Split Cue button sets the monitoring system to Split Cue mode,
illuminating the corresponding LED.
ļļ!
Warning ! To avoid damage to your
hearing do not operate the headphones or
sound system at excessively high volume.
Continued exposure to high volume sound
can cause frequency selective or wide range
hearing loss.
To Next Page
Loading...
Need help?
General
