Allen & Heath User Guide for XONE:DX with Serato ITCH 1.6 20
LIBRARY NAVIGATION
BROWSING
Press the VIEW button to open the ‘Browse’ panel.
Use the SCROLL KNOB to navigate the ‘Browse’ panel. The ‘Browse’ panel will open above the main file
library. The filters are ‘genre’, ‘BPM’, ‘artist’, and ‘album’.
You can narrow down your search by selecting the specific genre, BPM or name of the track you’re look-
ing for and ITCH will show the results on the main library window. You can move between the four fil-
ters with the ► (FWD) and ◄ (BACK) buttons, the computer keyboard or by clicking with the mouse.
LIBRARY STATUS ICONS
The column at the far left shows the status of each track, examples of these icons are below.
ITCH has detected some corruption in the MP3 file. If possible, re-encode the MP3.*
The track has been imported from the iTunes library.
The track has been imported from iTunes but is corrupt *
The track cannot be found. Most likely the file has been renamed or moved.
ITCH is trying to import a track from the iTunes library, but cannot find the file.
Tracks that are read-only have a locked icon.
* See CORRUPT FILES page 60.
PREPARE
The ‘Prepare Panel’ is an area for holding tracks, much like preparing a set by lifting records partially out
of your record bag.
Click the ‘Prepare’ button in ITCH to open the ‘Prepare Panel’. Navigate through your library with the
keyboard and use the mouse to drag tracks or crates into the prepare window or onto the prepare tab.
These tracks will be removed from the prepare panel once they have been played. All tracks in the pre-
pare panel will be discarded when you exit ITCH.
You can also hold down the SHIFT and press the SCROLL knob on the Xone:DX to add the currently
selected song to the prepare crate.
To Next Page
Loading...
Need help?
General
