Installation Instructions
POINT I/O 2 Current and 2 Voltage Input
Analog Modules
Catalog Numbers 1734-IE2C, 1734-IE2CK, 1734-IE2V,
1734-IE2VK, Series C
Catalog numbers with the suffix ‘K’ are conformal coated and their specifications are the
same as non-conformal coated catalogs.
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Prevent Electrostatic Discharge 3
North American Hazardous Location Approval 4
European Hazardous Location Approval 5
Before You Begin 7
Install the Mounting Base 9
Install the Module 10
Install the Removable Terminal Block 12
Wire the Module 15
Communicate with the Module 17
Interpret Status Indicators 18
Specifications 20
To Next Page
Need help?
General
