POINT I/O 2 Current and 2 Voltage Input Analog Modules 21
Publication 1734-IN027D-EN-E - December 2018
(1)
Includes offset, gain, non-linearity, and repeatability error terms.
General Specifications
Attribute 1734-IE2C, 1734-IE2CK 1734-IE2V, 1734-IE2VK
Terminal base 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS
Terminal base screw torque 0.6 Nm (7 lb-in)
Indicators, logic side 1 green/red – module status
1 green/red – network status
2 green/red – input status
Keyswitch position 3
POINTBus current, max 75 mA @ 5V DC
Power dissipation, max 0.6 W @ 28.8V DC 0.75 W @ 28.8V DC
Thermal dissipation, max 2.0 BTU/hr @ 28.8V DC 2.5 BTU/hr @ 28.8V DC
Isolation voltage 50V continuous
No isolation between individual
channels
Tested to withstand 2550V DC
for 60s
50V continuous
No isolation between individual
channels
Tested to withstand 2200V DC
for 60s
External DC power
Supply voltage, nom
Voltage range
Supply current
24V DC
10...28.8V DC
10 mA @ 24V DC
24V DC
10...28.8V DC
15 mA @ 24V DC
Dimensions (HxWxD), approx. 56 x 12 x 75.5 mm (2.21 x 0.47 x 2.97 in.)
Weight, approx. 0.036 kg (0.08 lb)
Wiring category
(1)
(2)
1 – on signal ports
Wire size 0.25…2.5 mm
2
(22…14 AWG) solid or stranded shielded copper wire
rated at 75 °C (167 °F) or greater 1.2 mm (3/64 in.) insulation max
Enclosure type rating None (open-style)
North American temp code T5 T4A
ATEX temp code T4
(1)
Use this conductor category information for planning conductor routing as described in Industrial Automation Wiring
and Grounding Guidelines, publication 1770-4.1.
(2)
Use this Conductor Category information for planning conductor routing as described in the appropriate System Level
Installation Manual.
To Next Page
Loading...
