Allen-Bradley 1734-OE2V - Wire the Module

POINT I/O 2 Current Output and 2 Voltage Output Analog Modules 13
Publication 1734-IN002E-EN-E - October 2016
Wire the Module
WARNING: If you connect or disconnect wiring while the field-side power is
on, an electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
1734
OE2C
NODE:
0
1
43962
1734-OE2C POINT I/O 2 Current Output Analog Module
Module Status
Network Status
Status of Output 0
Status of Output 1
Output 0 Connection
Output 1 Connection
C
Chas Gnd = Chassis Ground
C = Common
V = Supply
Chas Gnd
Chas Gnd
C
V
V
Module
Status
Network
Status
4-20 mA
Analog
Output