POINT I/O 2 Current Output and 2 Voltage Output Analog Modules 17
Publication 1734-IN002E-EN-E - October 2016
Module Status
Indication Probable Cause
Off No power is applied to device.
Green Device is operating normally.
Flashing Green Device needs commissioning due to configuration missing, incomplete, or
incorrect.
Flashing Red Recoverable fault is present.
Red Unrecoverable fault may require device replacement.
Flashing Red/Green Device is in self-test.
Network Status
Indication Probable Cause
Off Device is not online.
- Device has not completed dup_MAC_id test.
- Device not powered. Check module status indicator.
Flashing Green Device is online but has no connections in the established state.
Green Device is online and has connections in the established state.
Flashing Red One or more I/O connections are in timed-out state.
Red Critical link failure is present with failed communication device. Device
detected error that prevents it communicating on the network.
Flashing Red/Green Communication faulted device is present.
The device detected a network access error and is in communication faulted
state.
Device received and accepted an Identify Communication Faulted Request -
long protocol message.
Channel Status
Indication Probable Cause
1734-OE2C
Probable Cause
1734-OE2V
Off Module is in CAL mode.
Green Normal operation is present with channel actively controlling outputs.
To Next Page
Loading...
