POINT I/O 2 Current Output and 2 Voltage Output Analog Modules 19
Publication 1734-IN002E-EN-E - October 2016
Current Load on
Voltage Output
—3mA
Resistive Load on
Current Output
0...750Ω —
Conversion Type Digital to analog converter
Conversion Rate 16μs20μs
Data Format Signed Integer
Calibration Factory Calibrated
(1)
Includes offset, gain, non-linearity and repeatability error terms.
General Specifications
Attribute 1734-OE2C 1734-OE2V
Terminal base 1734-TB, 1734-TBS, 1734-TB3, 1734-TB3S,1734-TOP, or 1734-TOPS
wiring base assembly
POINTBus Current, max 75 mA @5V DC
Power Dissipation, max 750 Ω load on each output -
1.23 W
0Ω load on each output
- 1.83 W
1.0 W
Thermal Dissipation, max 750Ω load on each output
- 4.19 BTU/hr
0Ω load on each output
- 6.24 BTU/hr
3.4BTU/hr
Isolation Voltage
(Continuous-voltage
Withstand Rating)
50V Continuous
Tested to withstand 2200V DC for 60 s
No isolation between individual channels
External DC power
Supply Voltage, nom
Voltage Range
Supply Current
24V DC
10...28.8V DC
70 mA @ 24V DC (including
outputs @20 mA)
24V DC
10...28.8V DC
35 mA @ 24V DC (including
outputs @3 mA)
Indicators, logic side 1 green/red – module status
1 green/red – network status
2 green/red – output status
Keyswitch Position 4
Dimensions H x W x L
56 x 12 x 75.5 mm (2.21 x 0.47 x 2.97 in)
Output Specifications
Output Specifications 1734-OE2C 1734-OE2V
To Next Page
Loading...
