36 Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012
Chapter 2 Prepare the Computer and Load Controller Firmware
Install the Studio 5000 Environment
The Studio 5000 environment, version 21.00.00, installation process is configured so that,
among other software applications, RSLinx Classic software, version 3.51.00 and RSNetWorx
for DeviceNet software, version 21.00.00, are automatically installed.
The automatic installation option is enabled by default. You can change the installation settings
and install RSLinx Classic software or RSNetWorx for DeviceNet software separately. We
strongly recommend that you use the installation process default settings described in
this chapter.
1. Start the installation.
You c an lo ad the s o f t war e from a CD or web download.
2. Choose a language, fill in the
appropriate information, and
click Next.
The steps described in this section might vary slightly from the steps you complete during your Studio 5000
environment, version 21.00.00, installation.
To Next Page
Loading...
Need help?
General
