Allen-Bradley 2097 series User Manual

Installation Instructions
Bulletin 2097 AC Line Filters
Catalog Numbers 2097-F1, 2097-F2, 2097-F4, 2097-F5, 2097-F6
About the AC Line Filters
This publication provides installation instructions for the Bulletin 2097 AC Line Filters. The
2097-Fx AC Line Filters apply to Kinetix 300 and Kinetix 350 servo drives. Use these
instructions for installing and wiring your AC Line Filter. For more information refer to the user
manual available for your drive listed in Additional Resources
on page 8.
Topic Page
About the AC Line Filters 1
Important User Information 2
Before You Begin 3
Install the AC Line Filter (side-mount) 4
Install the AC Line Filter (rear-mount) 5
Bulletin 2097 AC Line Filter Specifications 8
Additional Resources 8
Allen-Bradley 2097-F1

Allen-Bradley 2097 series Specifications

General

Model	2097 Series
Protection Rating	IP20
Communication Protocol	EtherNet/IP
Communication	EtherNet/IP
Feedback Type	Incremental Encoder, Resolver
Safety	STO (Safe Torque Off)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)

Summary

About AC Line Filters

Important User Information

Before You Begin

Install AC Line Filter Side-Mount

Install AC Line Filter Rear-Mount

Wire the AC Line Filter

AC Line Filter Dimensions

AC Line Filter Specifications

Additional Resources