Rockwell Automation Publication IASIMP-QS024C-EN-P - August 2014 31
Prepare the Computer and Load Controller Firmware Chapter 2
Install the Studio 5000 Environment
The Studio 5000 environment installation process is configured so that, among other software applications, RSLinx Classic
software, version 3.51.00, is automatically installed.
The automatic installation option is enabled by default. You can change the installation setting and install RSLinx Classic
software separately. We strongly recommend that you use the installation process default settings that are described in this
chapter.
1. Start the installation.
You can load the software from a CD or web download.
2. Choose a language, enter the required
information, and click Next.
3. Use the default selections and click Install.
4. Read the license agreement carefully.
The steps in this section are based on a version 21.00.00 Studio 5000 environment installation. The steps necessary for your
installation may vary.
To Next Page
Loading...
