6 ControlLogix High Speed Analog I/O Module
Publication
1756-IN004A-EN-P - February 2002
Identify the Module Components
You received the following components with your order:
• 1756-IF4FXOF2F module
• Removable Terminal Block (RTB) door label
If you did not receive these components, contact your local
distributor Rockwell Automation sales office.
This module mounts in a ControlLogix chassis and uses a
separately-ordered RTB or a Bulletin 1492 Interface Module (IFM) to
connect all field-side wiring.
This module uses one of the following RTBs:
• 1756-TBCH 36 position Cage clamp RTB
• 1756-TBS6H 36 position Spring clamp RTB
Use an extended-depth cover (1756-TBE) for applications with heavy
gauge wiring or requiring additional routing space. When using an
IFM, consult the documentation that came with it to connect
all wiring.
IMPORTANT
Before you install your module, you should
have already:
• installed and grounded a 1756 chassis and
power supply.
• ordered and received an RTB or IFM and its
components for your application.
To Next Page
Loading...
Need help?
General
