Rockwell Automation Publication 440R-UM013E-EN-P - March 2017 87
Troubleshooting Chapter 11
Terminal Block Removal and
Replacement
Terminal blocks can be replaced following these instructions.
Terminal Block Removal
GSR relays have removable terminal blocks. Use a screwdriver as a lever to
remove the blocks. As shown in Figure 87
, insert the screwdriver into the slot
and pry up.
Figure 87 - Terminal Block Removal
Terminal Block Replacement
The terminal blocks are keyed to help prevent a block from being inserted into
an incorrect location. The orange-colored insert provides the orientation of the
key (Figure 88
).
Figure 88 - Orange-colored Keyway
Orange inserts
match keys
To Next Page
Loading...
