Allen-Bradley MicroLogix 1000 User Manual

Reference
Understanding the Communication Protocols
D–19
Example DH-485 Connections
The following network diagrams provide examples of how to connect Series C or
later MicroLogix 1000 discrete and all MicroLogix 1000 analog controllers to the
DH-485 network using the AIC+. For more information on the AIC+, see the
Advanced Interface Converter and DeviceNet Interface Installation Instructions,
Publication 1761-5.11.
DH-485 Network with a MicroLogix 1000 Controller
MicroLogix DH-485 Network
PC
connection from
port 1 or port 2
to MicroLogix
1761-CBL-AM00
or
1761-CBL-
HM02
AIC+
(1761-NET-AIC)
24V dc
(user supplied)
1761-CBL-AP00
or
1761-CBL-PM02
APS
1747-CP3
or
1761-CBL-AC00
PC to port 1
or port 2
1761-CBL-AP00
or
1761-CBL-PM02
MicroLogix 1000 (Series C or later discrete or all analog)





AIC+
(1761-NET-AIC)
24V dc
(user supply needed if not connected
to a MicroLogix 1000 controller)
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive

Allen-Bradley MicroLogix 1000 Specifications

General

Communication Ports	RS-232
Power Supply	24V DC or 120/240V AC
Programming Software	RSLogix 500
Manufacturer	Allen-Bradley
Category	Controller
Series	MicroLogix
Programming Language	Ladder Logic
Input Voltage	24V DC or 120/240V AC
I/O Points	10 to 32 points
Processor Type	8-bit
Operating Temperature	0…55 °C (32…131 °F)
Processor	8-bit