Allen-Bradley MicroLogix 1000

Hardware
Preface
MicroLogix 1000 Programmable Controllers User Manual
3–12
Cable Selection Guide
1747-CP3
1761-CBL-AC00
Cable Length Connections from to AIC+
External
Power Supply
Required
➁
Power Selection
Switch Setting
➁
1747-CP3 3m (9.8 ft)
c77
SLC 5/03 or SLC 5/04 processor , channel 0 port 1 yes external
77C
1761-CBL-AC00
➀
9f
45 cm (17.7 in)
PC COM port port 1 yes external
76 C C00
PanelV iew 550 through NULL modem adapter port 1 yes external
DTAM Plus / DT AM Micro  port 1 yes external
Port 1 on another AIC+ port 1 yes external
1761-CBL-AS03
1761-CBL-AS09
Cable Length Connections from to AIC+
External
Power Supply
Required
➀
Power Selection
Switch Setting
➀
1761-CBL-AS03
1
76
1-
C
BL-AS
09
3m (9.8 ft)
9
.5m (31.1
7
f
t)
SLC 500 Fixed,
SLC 5/01, SLC 5/02, and SLC 5/03 processors
port 3 yes external
1
76
1-
C
BL-AS
09
9
.5m (31.1
7
f
t)
PanelV iew 550 RJ45 port port 3 yes external
1761-CBL-AM00
1761-CBL-HM02
➁
Cable Length Connections from to AIC+
External
Power Supply
Required
Power Selection
Switch Setting
1761-CBL-AM00 45 cm (17.7 in)
26f
MicroLogix 1000 port 2 no cable
76 C 00
1761-CBL-HM02
➁
c77
2m (6.5 ft)
to port 2 on another AIC+ port 2 yes external
➀
External power supply required unless the AIC+ is powered by the device connected to port 2, then
the selection switch should be set to cable.
➁
Series B or higher cables are required for hardware handshaking.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive