Name: Allen-Bradley POINT I/O 1734-AENT
Brand: Allen-Bradley
Rating: 4 (1 reviews)

To Next Page

To Previous Page

POINT I/O EtherNet/IP Adapter 15

Publication 1734-IN042F-EN-P - November 2018

Interpret Status Indicators

Refer to the following diagram and table for information on how to interpret the

status indicators.

POINT I/O EtherNet/IP Adapter, Series C

WARNING: When used in a Class I, Division 2, hazardous location, this

equipment must be mounted in a suitable enclosure with proper wiring method

that complies with the governing electrical codes.

WARNING: If you connect or disconnect wiring while the field-side power is

on, an electrical arc can occur. This could cause an explosion in hazardous

location installations. Be sure that power is removed or the area is

nonhazardous before proceeding.

WARNING: Do not wire more than two conductors on any single terminal.

WARNING: To comply with the CE Low Voltage Directive (LVD), this equipment

must be powered from a Safety Extra Low Voltage (SELV) or Protected Extra Low

Voltage (PELV) compliant source.

43264

1734-AENT

System power

Field power

Module status

Network activity

Network status

POINTBus status

Questions and Answers:

Need help?

Do you have a question about the Allen-Bradley POINT I/O 1734-AENT and is the answer not in the manual?

Allen-Bradley POINT I/O 1734-AENT Specifications

General