Allen-Bradley POINT I/O series User Manual

6 POINT I/O 2 and 4 Relay Output Modules
Publication 1734-IN055H-EN-E - August 2016
About the Module
These POINT I/O™ 2 and 4 Relay Output Modules, 1734-OW2, 1734-OW4, Series C
products can be used with DeviceNet and PROFIBUS adapters. They can be used with
ControlNet and Ethernet adapters using RSLogix 5000, version 11 or later.
See the figures to familiarize yourself with major parts of the modules. The wiring base
assembly consists of a mounting base, 1734-MB, and removable terminal block, 1734-RTB
or 1734-RTBS, and 1734-TOP or 1734-TOPS one-piece terminal base.
Modules Mounted on Removable Terminal Block and Mounting Base
Description Description
1 Module locking mechanism 6 Mounting base
2 Slide-in writable label 7 Interlocking side pieces
3 Insertable I/O module 8 Mechanical keying
4 Removable Terminal Block handle 9 DIN rail locking screw (orange)
5 Removable Terminal Block (RTB) 10 Module wiring diagram
M
odule
S
tatus
N
etwork
Statu
s
1
10
9
8
7
2
3
4
5
6
45720

Allen-Bradley POINT I/O series Specifications

General

Series	POINT I/O
Category	Control Unit
Mounting Type	DIN Rail
Manufacturer	Allen-Bradley
Communication Interface	EtherNet/IP, DeviceNet, ControlNet, PROFIBUS DP
Storage Temperature Range	-40°C to 85°C (-40°F to 185°F)
Relative Humidity	5% to 95% (non-condensing)
Shock Resistance	30g (11ms duration)
Vibration Resistance	5G
Certifications	CE, UL, ATEX, IECEx
IP Rating	IP20