Need help?Do you have a question about the Allen-Bradley POINT I/O PROFIBUS 1734-APB and is the answer not in the manual?
General| Catalog Number | 1734-APB |
|---|---|
| Communication Protocol | PROFIBUS DP |
| Power Supply | 24V DC |
| Mounting Type | DIN Rail |
| Product Type | PROFIBUS Communication Interface Module |
| Operating Temperature | 0 to 60 °C |
| PROFIBUS DP Communication Rate | Up to 12 Mbps |
| Dimensions | 87 mm x 12 mm x 51 mm (3.43 in. x 0.47 in. x 2.01 in.) |
| Weight | 0.2 kg |
Identifies practices leading to injury, death, property damage, or economic loss.
Details setting the node address using a 2-position thumbwheel switch.
Details the step-by-step process for installing the adapter on a DIN rail.
Details the procedure for removing an existing adapter from the DIN rail.
Explains how the adapter supplies power to POINT I/O modules and power limitations.
Details the 12/24V DC wiring connections for the adapter and its terminals.
Details the pin assignments for the PROFIBUS connection plug.
Details communication interface and power supply specs for the 1734-APB adapter module.
To Next Page