Allen-Bradley POINT I/O PROFIBUS 1734-APB User Manual

i Publication 1734-UM005B-EN-P - June 2001
Table of Contents
Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Preface Purpose of This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . P-1
Who Should Use This Manual . . . . . . . . . . . . . . . . . . . . . . P-1
Related Products and Documentation. . . . . . . . . . . . . . . . . P-1
European Communities (EC) Directive Compliance . . . . . . P-3
EMC Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-3
Environmental/Safety Protection . . . . . . . . . . . . . . . . . . P-3
Chapter 1
What is the PROFIBUS Adapter
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
PROFIBUS Adapter Overview . . . . . . . . . . . . . . . . . . . . . . 1-1
Communicating through the Adapter . . . . . . . . . . . . . . 1-2
I/O Module Removal and Insertion Under Power . . . . . 1-2
Startup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Set the Adapter Node Address . . . . . . . . . . . . . . . . . . . 1-2
Configure the Adapter for PROFIBUS Communication . . 1-3
Configure the I/O Modules for PointBus Communication 1-3
Diagnostic Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Network Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Chapter Summary and What’s Next . . . . . . . . . . . . . . . . . . 1-4
Chapter 2
Installing the PROFIBUS Adapter
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Installing the PROFIBUS Adapter . . . . . . . . . . . . . . . . . . . . 2-2
Installing a Replacement PROFIBUS Adapter to an
Existing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Wiring the PROFIBUS Adapter. . . . . . . . . . . . . . . . . . . . . . 2-6
Module Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Wiring Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
PROFIBUS Connection Plug Wiring . . . . . . . . . . . . . . . 2-9
Chapter Summary and What’s Next . . . . . . . . . . . . . . . . . . 2-9
Chapter 3
Configuring the POINT I/O System
In This Chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Installing the GSD File. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Adding the Master to the Network . . . . . . . . . . . . . . . . . . . 3-3
Adding the Adapter to the Network . . . . . . . . . . . . . . . . . . 3-5
Adding I/O Modules to the Adapter. . . . . . . . . . . . . . . . . . 3-6
Configuring I/O Modules. . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Enable/Disable Diagnostic Functionality for
your Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Configure Fault Action/Value for your Output Modules . 3-10
Configure Idle Action Value for your Output Modules . . 3-11
Download to Master System . . . . . . . . . . . . . . . . . . . . . . . 3-13
Chapter Summary and What’s Next . . . . . . . . . . . . . . . . . . 3-14
Allen-Bradley HMIs

Allen-Bradley POINT I/O PROFIBUS 1734-APB Specifications

General

Brand	Allen-Bradley
Model	POINT I/O PROFIBUS 1734-APB
Category	Control Unit
Language	English