Allen-Bradley POINT I/O PROFIBUS 1734-APB - Adding the Adapter to the Network

Publication 1734-UM005B-EN-P - June 2001
Configuring the POINT I/O System 3-5
Adding the Adapter to the
Network
The slave appears on the
network.
1. Select “1734-APB” in
the “Available Slaves”
list.
2. Click “Add>>”.
Select the “Slave” entry in the
“Insert” menu.
(Click “OK” to continue.)
Select station address here.
Type a description here.
Allen-Bradley HMIs