Rockwell Automation Publication 520-UM001G-EN-E - September 2014 93
Programming and Parameters Chapter 3
Terminal Block Group (continued)
t104 [Wake Time]
Sets the analog input time the drive must stay above to wake from sleep mode.
Values Default: 0.0 s
Min/Max: 0.0/600.0 s
Display: 0.1 s
t105 [Safety Open En]
PowerFlex 525 only.
Sets the action when both safety inputs (Safety 1 and Safety 2) are disabled (de-energized – no power is applied).
Options 0“FaultEnable” (Default)
1 “FaultDisable”
To Next Page
Loading...
