Allen-Bradley Stratix 5200 1783-CMS6P User Manual

Installation Instructions
Original Instructions
Stratix 5200 Ethernet Managed Switches
Catalog Numbers 1783-CMS6B, 1783-CMS6P, 1783-CMS10B, 1783-CMS10P, 1783-CMS10DP, 1783-CMS10DN, 1783-CMS20DB, 1783-CMS20DP, 1783-CMS20DN
Topic Page
Parts List 5
Required Tools 5
Site Requirements 5
Mount the Switch 6
Ground the Switch 7
Wire the DC Power Source 7
Install the Power Connectors on the Switch 8
Wire External Alarms 9
Connect to Console Ports 11
Install or Remove the SD Card 12
Install or Remove the SD Card 12
Install or Remove an SFP Module 12
Connect to 10/100 and 10/100/1000 Ports 13
Connect to 10Base-T, 100Base-TX, or 1000Base-T Ports 14
Connect to SFP Module Ports 13
Connect to a Dual-purpose Port 13
Confirm Installation 14
Remove the Switch from the DIN Rail 14
Specifications 15
Additional Resources 15

Allen-Bradley Stratix 5200 1783-CMS6P Specifications

General

Product Type	Managed Ethernet Switch
Mounting Type	DIN Rail
Power over Ethernet (PoE)	Yes
Total PoE Budget	60W
Switching Capacity	12 Gbps
MAC Address Table Size	8K
Jumbo Frame Support	Yes, up to 9216 bytes
Power Supply	24V DC
Operating Temperature	-40°C to 60°C (-40°F to 140°F)
PoE Standard	IEEE 802.3at
Storage Temperature	-40…85 °C (-40…185 °F)
Humidity	5…95% (non-condensing)
Certifications	CE, UL, cUL, FCC, C-Tick
Ports	6 x 10/100/1000Base-T PoE+