Alliance Laundry Systems NetMaster HC18NC2 - Start Pulse Value +032

Programming NetMaster
27
F232152
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
32. Start Pulse Value “+032”
This option allows the owner to program the value of
the Start Pulse if used for multiple pulses with an after-
market central card reader or pay system. Refer to
option 124 for additional information.
How to Program Start Pulse Value
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 43
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+032” appears in the VFD. Refer
to Figure 44.
Figure 44
4. When “+032” appears in the VFD, press the
START (enter) keypad. There are five digits in
the Start Pulse Value. The fifth digit will appear
in the VFD and will flash one second on and one
second off. Refer to Figure 45.
Figure 45
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the value of the
fifth digit. Refer to Figure 46.
Figure 46
C762I
C780I
C780I
C826I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
C826I
neednew#2
1
32